Description
The RCT MegaPower T-2000s (MP-T2000S) is a 2 000 W pure-sine-wave inverter trolley with two pre-installed 12 V, 100 Ah batteries (24 V bank) and a built-in MPPT solar charger.
- Rated power 2 000 W; output 220 V AC, 50/60 Hz, pure sine wave; output power factor 1.0
- Battery bank 24 V, made up of 2 × 12 V / 100 Ah pre-installed batteries (chemistry is not printed on the official sheet)
- Solar: maximum PV voltage ≤ 100 V DC; charge voltage 30–100 V DC; rated MPPT current 30 A; maximum power 800 Wp
- Product dimensions 439 × 380 × 585 mm
Figures in the table are from the official RCT MegaPower T-2000s specification sheet. That official sheet does not print a shipping weight, so the existing 90 kg store value has been left unchanged and noted. It is not a repeated placeholder number of the 42 kg / 45 kg / 0.5 kg kind seen on unrelated products.
Technical specifications
| Official model |
RCT T-2000s / MP-T2000S |
| Rated power |
2 000 W |
| Output voltage |
220 V AC |
| Output frequency |
50/60 Hz |
| Output waveform |
Pure sine wave |
| Output power factor |
1.0 |
| Battery voltage |
24 V |
| In-built batteries |
2 × 12 V, 100 Ah, pre-installed (chemistry not stated on the official sheet) |
| Maximum PV voltage |
≤ 100 V DC |
| Solar charge voltage |
30–100 V DC |
| Rated solar charge current |
MPPT 30 A |
| Maximum PV power |
800 Wp |
| Floating charge voltage |
27.6 V DC |
| Over-charge protection / recovery |
28.4 V DC / 28.0 V DC |
| High-voltage protection / recovery |
32 V DC / 30.4 V DC |
| Low-voltage protection / recovery |
23.2 V DC / 26 V DC |
| USB output |
2 × 5 V DC, maximum 2 A |
| 12 V DC output |
2 ports, maximum 2 A |
| Exhaust fan start |
> 45 °C |
| Operating ambient temperature |
−20 °C to +50 °C |
| Storage temperature |
−25 °C to +55 °C |
| Humidity |
0–90%, no condensation |
| Product dimensions |
439 × 380 × 585 mm |
| Shipping weight |
90 kg (not printed on the official sheet; left unchanged) |
Official datasheet: Official RCT MegaPower T-2000s specification sheet.
Use this portable power system as specified by the manufacturer. Any fixed electrical connection must be carried out by a qualified electrician and must adhere to local wiring regulations and standards.