Description
The SolarEdge Three Phase Inverter SE15K-ZA000NNN2 is the 15 kVA extended-power three-phase PV inverter. The official part number uses the earlier NNN2 suffix (not the later SetApp BXX4 mask).
- Official part number: SE15K-ZA000NNN2
- Rated AC power 15 000 VA; maximum continuous output current 23 A per phase
- Maximum DC power 20 250 W; max input voltage 900 Vdc; max input current 22 Adc
- Official weight 33.2 kg; dimensions 540 × 315 × 260 mm; IP65
Figures are from SolarEdge’s official Three Phase Inverter SE12.5K–SE27.6K datasheet (ROW ENG01/V11/2018), column SE15K (15 000 VA, 33.2 kg, 540 × 315 × 260 mm). That sheet covers the pre-SetApp extended-power family. The later Europe SetApp SE12.5K–SE17K sheet (mask SEXXK-XXXXXBXX4, 30.7 kg) does not include SE15K and does not match this NNN2 suffix, so it was not applied.
Technical specifications (SE15K-ZA000NNN2)
| Official model / part number |
SE15K-ZA000NNN2 |
| Type |
Three-phase PV inverter (extended-power, pre-SetApp NNN2 suffix) |
| Rated / maximum AC power output |
15 000 VA |
| AC output voltage (nominal) |
380 / 220 Vac or 400 / 230 Vac |
| AC output voltage range (L-N) |
184 – 264.5 Vac |
| AC frequency / supported grid |
50/60 ± 5 Hz; 3 / N / PE (WYE with neutral) |
| Maximum continuous output current (per phase) |
23 A |
| Maximum DC power (module STC) |
20 250 W |
| Max / nominal DC input voltage |
900 Vdc / 750 Vdc |
| Maximum input current |
22 Adc |
| Maximum / European weighted efficiency |
98% / 97.6% |
| Nighttime power consumption |
< 2.5 W |
| DC input |
2 MC4 pairs |
| Dimensions (h × w × d) |
540 × 315 × 260 mm |
| Weight |
33.2 kg |
| Noise / cooling / operating temperature |
< 50 dBA / user-replaceable fan / −20 °C to +60 °C (−40 °C on the 40M version) |
| Protection rating |
IP65 — outdoor and indoor |
| Safety |
IEC-62103 (EN50178), IEC-62109, AS3100 |
Official warranty on this datasheet is 12–20 years; refer to SolarEdge’s current warranty terms.
Official Datasheet: Official datasheet (PDF)
This product must be installed by a qualified electrician. All installations must adhere to local wiring regulations and standards.