Description
The Studer Xtender XTH-6000-48 is a Swiss-made multifunctional inverter/charger for 48 V battery systems. Official ingress protection is IP20. The model name’s 6 000 VA figure is the official 30-minute power at 25 °C; continuous power at 25 °C is 5 000 VA.
- Official model: XTH-6000-48
- Continuous power 5 000 VA (25 °C); 30-minute power 6 000 VA; 5-second power 15 kVA
- Maximum charging current 100 A; transfer time < 15 ms
- Official weight 42 kg; dimensions 230 × 300 × 500 mm; IP20
Figures are from Studer’s official Xtender family datasheet V2.6.1 (September 2026), column xth 6000-48.
Technical specifications (XTH-6000-48)
| Official model / store SKU |
XTH-6000-48 / XTH6000-48 |
| Type |
Multifunctional inverter, battery charger and transfer system |
| Nominal battery voltage / input range |
48 Vdc / 38 – 60 Vdc |
| Continuous power at 25 °C |
5 000 VA |
| 30-minute / 5-second power at 25 °C |
6 000 VA / 15 kVA |
| Output voltage / frequency |
Pure sine wave, 230 Vac ±2% (120 Vac on request); 45–65 Hz, crystal-controlled ±0.05% |
| Consumption OFF / stand-by / ON |
1.8 / 2.2 / 22 W |
| Maximum charging current |
100 A |
| AC input voltage / frequency |
150 – 265 Vac / 45 – 65 Hz |
| Input current max. (transfer) / output current max. |
50 Aac / 56 Aac |
| Transfer time |
< 15 ms |
| Dimensions (h × w × l) |
230 × 300 × 500 mm |
| Weight |
42 kg |
| Protection rating / operating temperature / humidity |
IP20 / −20 °C to 55 °C / 95% without condensation |
| Acoustic level |
< 40 dB / < 45 dB (without / with ventilation) |
| Safety / EMC listed |
LVD 2014/35/EU: EN/IEC 62477-1, 62109-1/2, 62040-1; EMC 2014/30/EU: EN/IEC 61000-3-2/3, 61000-6-2/4, 62040-2 |
The previous store weight of 8.63 kg was far below the official XTH range (34–46 kg) and was replaced. Parallel and three-phase combinations of up to 9 units are described on the official datasheet.
Official Datasheet: Official datasheet (PDF)
This product must be installed by a qualified electrician. All installations must adhere to local wiring regulations and standards.