Description
The Sungrow SBH150 is a high-voltage lithium iron phosphate (LiFePO4) stack for residential energy storage. This listing is the official 3-module configuration, with 15.0 kWh usable energy and a 211.2 V nominal voltage. Each SBH unit uses 5.0 kWh, 45 kg modules (2 to 8 modules per unit). Up to four units can be connected in parallel, for a maximum of 160 kWh.
- 15.0 kWh usable energy; 211.2 V nominal; 3 modules of 5.0 kWh
- LiFePO4 (lithium iron phosphate) prismatic cells
- 10.56 kW nominal power; 50 A maximum continuous charge / discharge current
- Stackable, modular, plug-and-play design with no cable between battery modules
- Indoor or outdoor floor-stand installation; IP55
- CAN communication; SOC and status indicators; DC breaker
Figures in the table are from Sungrow’s official SBH100/150/200/250/300/350/400 High Voltage LFP Battery datasheet (English, 2026 Version 1.1), published on Sungrow’s official support site (info-support.sungrowpower.com). Usable energy test conditions on that datasheet: 25 °C, 100% depth of discharge (DOD), 0.2C charge and discharge. Nominal power is stated on Sungrow’s official 2026 SBH150–400 and SBH200–400 datasheets on the same site; nominal charge/discharge current and power derating occur with temperature and state of charge.
Technical specifications
| Official model |
SBH150 |
| Battery type |
LiFePO4 prismatic cell |
| Configuration |
3 modules |
| Battery module |
5.0 kWh, 45 kg |
| Energy (usable) |
15.0 kWh |
| Nominal voltage |
211.2 V |
| Nominal power |
10.56 kW |
| Operating voltage |
178.2–240.9 V |
| Max. charge / discharge current (continuous) |
50 A |
| Depth of discharge |
Max. 100% DOD (settable) |
| Display |
SOC indicator, status indicator |
| Communication interface |
CAN |
| Protection |
Over/under voltage, over current, over/under temperature; DC breaker |
| Dimensions (W × H × D) |
675 × 740 × 350 mm |
| Weight |
151 kg |
| Installation location |
Indoor / outdoor |
| Mounting method |
Floor stand |
| Operating ambient temperature |
Charge 0 °C to 50 °C; discharge −20 °C to 50 °C |
| Degree of protection |
IP55 |
| Allowable relative humidity |
0% to 95% (no condensing) |
| Max. operating altitude |
Max. 2 000 m |
| Cooling method |
Natural convection |
| Certificates |
CE, CEC, IEC 62619, IEC 62040, UN 38.3, VDE 2510-50, IEC 62477, IEC 63056 |
Warranty: The official SBH datasheet states a 10-year warranty. Conditions apply; refer to Sungrow’s official battery warranty letter for this product.
Official Datasheet: Sungrow SBH100–400 High Voltage LFP Battery Datasheet (PDF, official, English, 2026 Version 1.1)
Official Product Page: Sungrow SBH100–400
This product must be installed by a qualified electrician. All installations must adhere to local wiring regulations and standards.