Description
This is the 5.0 kWh high-voltage LFP battery module used in Sungrow’s SBH100–SBH400 residential storage stacks. Official SBH systems are built from 2 to 8 of these modules (10.0 kWh to 40.0 kWh), and up to four units can be connected in parallel (160 kWh). This listing is for a single 5.0 kWh module, not a complete SBH stack.
- 5.0 kWh usable energy per module; 45 kg
- LiFePO4 prismatic cells
- Used in official stacks SBH100 (2 modules) through SBH400 (8 modules)
- Stack charge / discharge current up to 50 A continuous
- IP55 stacks; indoor or outdoor; floor stand
Technical specifications (SBH 5.0 kWh module)
The module line “5.0 kWh, 45 kg” and the stack table below are from Sungrow’s official SBH100/150/200/250/300/350/400 High Voltage LFP Battery datasheet (English, Version 4), hosted on Sungrow’s official support site. Chemistry, current, IP rating, temperature, certification and warranty are stated on that datasheet for the SBH range built from this module.
| Battery module (as stated) |
5.0 kWh, 45 kg |
| Battery type |
LiFePO4 prismatic cell |
| SBH100 (2 modules) |
10.0 kWh usable; 140.8 V nominal; 118.8–160.6 V; 675 × 580 × 350 mm; 106 kg |
| SBH150 (3 modules) |
15.0 kWh usable; 211.2 V nominal; 178.2–240.9 V; 675 × 740 × 350 mm; 151 kg |
| SBH200 (4 modules) |
20.0 kWh usable; 281.6 V nominal; 237.6–321.2 V; 675 × 900 × 350 mm; 196 kg |
| SBH250 (5 modules) |
25.0 kWh usable; 352.0 V nominal; 297–401.5 V; 675 × 1 060 × 350 mm; 241 kg |
| SBH300 (6 modules) |
30.0 kWh usable; 422.4 V nominal; 356.4–481.8 V; 675 × 1 220 × 350 mm; 286 kg |
| SBH350 (7 modules) |
35.0 kWh usable; 492.8 V nominal; 415.8–562.1 V; 675 × 1 380 × 350 mm; 331 kg |
| SBH400 (8 modules) |
40.0 kWh usable; 563.2 V nominal; 475.2–642.4 V; 675 × 1 540 × 350 mm; 376 kg |
| Max. charge / discharge current (continuous, SBH system) |
50 A |
| Depth of discharge |
Max. 100% DOD (settable) |
| Communication interface |
CAN |
| Installation location |
Indoor / outdoor |
| Mounting method |
Floor stand |
| Operating ambient temperature |
Charge 0 °C to 50 °C; discharge −20 °C to 50 °C |
| Degree of protection |
IP55 |
| Allowable relative humidity |
0% to 95% (non-condensing) |
| Max. operating altitude |
Max. 2 000 m |
| Cooling method |
Natural convection |
| Certificates |
CE, CEC, IEC 62619, IEC 62040, UN38.3, VDE 2510-50, IEC 62477, IEC 63056 |
Usable energy test conditions on the datasheet: 25 °C, 100% DOD, 0.2C charge and discharge. Normal charge/discharge current and power derating occur with temperature and state of charge.
Warranty: The official SBH datasheet states a 10-year warranty. Conditions apply; refer to Sungrow’s official battery warranty letter.
Official Datasheet: Sungrow SBH100–400 Datasheet (PDF, English V4)
Official Product Page: Sungrow SBH100–400
This product must be installed by a qualified electrician. All installations must adhere to local wiring regulations and standards.