Description
The Pylontech UP5000D is a 48 V low-voltage LiFePO4 (lithium iron phosphate) battery module for residential solar storage, backup and off-grid systems, as specified on the official Pylontech UP5000D sheet EN-SD-260507.
- Official model: UP5000D
- Nominal energy 4.8 kWh; usable capacity 4.56 kWh; depth of discharge 0.95 (95%)
- Nominal voltage 48 V DC
- Charge / discharge current: 100 A normal; 105–119 A for 15 minutes; 120–200 A peak for 15 seconds
- The official normal rating of 100 A equals 1C of the 4.8 kWh / 48 V nominal energy (100 Ah). The official sheet does not print the term “1C”.
- 8,000+ cycles at 25 °C under the manufacturer’s specified conditions; 15-year design life at 25 °C
- Up to 16 modules in one battery group
- RS485 / CAN communication
- IP20, protective class I — indoor / protected installation only
- Charge 0–50 °C; discharge −10–50 °C; storage −20–45 °C
- Humidity 5%–95% RH, no condensation; altitude ≤ 4 000 m
- Dimensions 442 × 420 × 161 mm; weight 39.7 kg
- Certifications: IEC 62619, IEC 63056, UL 1973, UL 9540A, IEC 61000-6-2, IEC 61000-6-3, UN 38.3
The recommended and maximum continuous operation current applies at a battery cell temperature of 10–40 °C; outside that range the operation current is derated, as stated on the official sheet. Cycle life is defined based on specific operation conditions; refer to Pylontech for details.
Technical specifications
| Official model |
UP5000D |
| Nominal voltage |
48 V DC |
| Nominal capacity |
4.8 kWh |
| Usable capacity |
4.56 kWh |
| Depth of discharge |
0.95 |
| Charge / discharge current (normal) |
100 A |
| Charge / discharge current (max) |
105–119 A for 15 minutes |
| Charge / discharge current (peak) |
120–200 A for 15 seconds |
| Short current / duration |
< 2 000 A / 1 ms |
| Communication |
RS485 / CAN |
| Maximum quantity in one battery group |
16 |
| Charge temperature |
0 °C to 50 °C |
| Discharge temperature |
−10 °C to 50 °C |
| Storage temperature |
−20 °C to 45 °C |
| Protective class |
I |
| IP rating |
IP20 (indoor / protected installation) |
| Humidity |
5%–95% RH, no condensation |
| Altitude |
≤ 4 000 m |
| Design life at 25 °C |
15 years |
| Cycle life at 25 °C |
8,000+ |
| Dimensions (W × D × H) |
442 × 420 × 161 mm |
| Weight |
39.7 kg |
| Certifications |
IEC 62619 / IEC 63056 / UL 1973 / UL 9540A / IEC 61000-6-2 / IEC 61000-6-3 / UN 38.3 |
A Pylontech-branded BMS communication diagram on this listing shows the UP5000D as a master module with US2000, US2000C, US3000, US3000C and UP5000 modules as slaves. That compatibility set is not stated on the official EN-SD-260507 specification sheet; follow the latest official Pylontech documentation for mixed-bank design.
Official datasheet (PDF): Pylontech UP5000D specification sheet EN-SD-260507
This product must be installed by a qualified electrician. All installations must adhere to local wiring regulations and standards (including NRS 097 where applicable).