Description
The Victron Phoenix Inverter 12/375 230V VE.Direct SCHUKO is a Victron Energy Phoenix inverter in the official VE.Direct 250 W–1600 W 230 V family (new models). IEC and Schuko versions of the same official model share the electrical ratings and mass; only the AC outlet differs.
- Official model: Phoenix Inverter 12/375 230 V VE.Direct, SCHUKO outlet
- Continuous output power at 25 °C: 375 W (at 40 °C: 300 W)
- Time-limited / peak power: 450 W / 10 s; 600 W / 2 s
- Output: 230 VAC ± 3 %, 50 Hz or 60 Hz (adjustable); VE.Direct communication port; ECO mode; remote on/off; IP21
- Official weight 3 kg; dimensions (h × w × d) 86 × 165 × 260 mm
Figures in the table are from Victron Energy’s official Inverters VE.Direct – new models, 250 W–1600 W 230 V datasheet, column 12/375. On that sheet the 12/375 column’s continuous power at 25 °C is 375 W.
Technical specifications (Phoenix Inverter 12/375 230 V VE.Direct)
| Official model |
Phoenix Inverter 12/375 230 V VE.Direct |
| AC outlet (this listing) |
Schuko (CEE 7/4) |
| Cont. power at 25 °C |
375 W |
| Cont. power at 40 °C |
300 W |
| Time-limited power (cold start) |
450 W / 10 s |
| Peak power |
600 W / 2 s |
| Output AC voltage / frequency |
230 VAC ± 3 %, 50 Hz or 60 Hz (adjustable) |
| Input voltage range (12 V model) |
9.2 – 17 V |
| DC low shut down / restart (adjustable, 12 V) |
9.3 V / 10.9 V |
| Max. efficiency (12 V) |
86% |
| Zero-load power / default ECO-mode zero-load |
6 W / see official sheet (default retry interval 2.5 s, adjustable) |
| Protection category |
IP21 |
| Material and colour |
Steel chassis and plastic cover (blue RAL 5012) |
| Battery connection |
Screw terminals; max. cable cross-section 10 mm² |
| Operating temperature |
−40 °C to +65 °C (fan-assisted cooling); derate 1.25 % per °C above 40 °C |
| Humidity (non-condensing) |
max 95 % |
| Weight |
3 kg |
| Dimensions (h × w × d) |
86 × 165 × 260 mm |
| Remote on/off |
Yes |
| Communication |
VE.Direct |
| Safety / EMC / automotive |
EN-IEC 60335-1 / EN-IEC 62109-1; EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3; ECE R10-4 |
IEC and Schuko are AC-outlet variants of the same official VE.Direct model; they are not different electrical ratings. Dynamic DC-low cut-off is fully configurable; see Victron’s official VE.Direct Phoenix dynamic cut-off documentation. Warranty years are not stated on this datasheet; refer to Victron Energy’s official warranty terms.
Official Datasheet: Victron Inverters VE.Direct 250 W–1600 W 230 V datasheet (PDF)
Official Product Page: Victron Phoenix Inverter VE.Direct
This product must be installed by a qualified electrician. All installations must adhere to local wiring regulations and standards.