Description
The Photon PTN-BAT-05K-WM-LFP-300 is a 5.12 kWh, 51.2 V LiFePO4 wall-mount or floor-stand battery with a 300 A busbar.
- Official model: PTN-BAT-05K-WM-LFP-300
- Usable energy 5.12 kWh; nominal voltage 51.2 V; operating voltage 45.6–56.16 V; LFP
- Nominal output current 100 A / 50 A; BMS protection current 110 A for 1 s
- 460 × 161.5 × 614 mm; 47 kg; IP20; floor-stand or wall-mounted
- Up to 15 units in parallel; CAN / RS485 / RS232 / optional Wi-Fi
Figures in the table are from the official Photon PTN-BAT-05K-WM-LFP-300 specification sheet V03 (16 February 2024), exact-model column. Test conditions: 100% depth of discharge, 0.2C charge and discharge at 25 °C. Charge/discharge derating occurs from −10 °C to 5 °C and from 45 °C to 55 °C.
Technical specifications
| Official model |
PTN-BAT-05K-WM-LFP-300 |
| Cell technology |
LFP (LiFePO4) |
| Battery usable energy |
5.12 kWh |
| Nominal voltage |
51.2 V |
| Operating voltage |
45.6–56.16 V |
| Nominal output current |
100 A / 50 A |
| BMS protection current |
110 A, 1 s |
| Display |
SOC status indicator, LED indicator |
| Communication |
CAN / RS485 / RS232 / optional Wi-Fi |
| Dimensions (W × D × H) |
460 × 161.5 × 614 mm |
| Weight |
47 kg |
| Installation |
Floor stand or wall mounted |
| Operating temperature |
−20 °C to 60 °C |
| Environmental humidity |
≤ 95% RH, no condensation |
| Protection rating |
IP20 |
| Cycle life |
3 500 cycles or ten (10) years at 80% DoD / 25 °C / 0.5C, 70% EOL |
| Scalability |
Maximum 15 batteries in parallel |
| Application |
On-grid / on-grid + backup / off-grid |
| Certificates |
Cell: UN38.3 / IEC 62619 / UL 1642 / JET; battery pack: UN38.3 / IEC 62619 / IEC 61000 / UKCA |
Warranty: 3 500 cycles or ten (10) years, whichever comes first, under the stated conditions. Refer to the official warranty letter.
Official datasheet (PDF): Photon PTN-BAT-05K-WM-LFP-300 specification sheet V03 (16 February 2024). A live manufacturer download URL was not found at the time of writing; the official Photon-branded exact-model sheet was used for every figure in this table.
This product must be installed by a qualified electrician. All installations must adhere to local wiring regulations and standards.