Description
The SolarEdge SE3000-ZA000NNN2 is the classic (non-HD-Wave) single-phase grid-tied PV inverter in SolarEdge’s SE2200–SE6000 family, with a rated and maximum AC power output of 3000 VA. It is the SE3000 model, not the HD-Wave SE3000H. Specifications below are from SolarEdge’s official Single Phase Inverters SE2200–SE6000 datasheet (V01, December 2015), SE3000 column.
- Official part number: SE3000-ZA000NNN2 (classic SE3000, not the HD-Wave SE3000H)
- Rated AC power 3000 VA; maximum continuous output current 16.5 A
- Maximum DC power 4050 W; max input voltage 500 Vdc; max input current 11.5 Adc
- Official weight 20.2 kg (SE2200/SE3000 group); dimensions 540 × 315 × 172 mm; IP65
Figures are from SolarEdge’s official Single Phase Inverters SE2200–SE6000 datasheet (V01, December 2015), column SE3000. That sheet splits installation specs into two groups: 20.2 kg and 540 × 315 × 172 mm for SE2200/SE3000, and 21.7 kg and 540 × 315 × 191 mm for SE3500–SE6000.
Technical specifications (SE3000-ZA000NNN2)
| Official model / part number |
SE3000-ZA000NNN2 |
| Type |
Classic single-phase PV inverter (not HD-Wave) |
| Rated / maximum AC power output |
3000 VA |
| AC output voltage (nominal) / range |
220 / 230 Vac; 184 – 264.5 Vac |
| AC frequency |
50/60 ± 5 Hz |
| Maximum continuous output current |
16.5 A |
| Maximum DC power (module STC) |
4050 W |
| Max / nominal DC input voltage |
500 Vdc / 350 Vdc |
| Maximum input current |
11.5 Adc |
| Maximum / European weighted efficiency |
97.6% / 97.6% |
| Nighttime power consumption |
< 2.5 W |
| DC input |
1 MC4 pair |
| Dimensions (h × w × d) |
540 × 315 × 172 mm |
| Weight |
20.2 kg |
| Noise / cooling |
< 25 dBA / natural convection |
| Protection rating |
IP65 — outdoor and indoor |
| Safety |
IEC-62103 (EN50178), IEC-62109 |
Official warranty on this family is 12–25 years in later SolarEdge materials; refer to SolarEdge’s current warranty terms. This is not an HD-Wave (SE3000H) inverter.
Official Datasheet: Official datasheet (PDF)
This product must be installed by a qualified electrician. All installations must adhere to local wiring regulations and standards.